Affordable Cases spearheaded this unique case design many years ago for many of the top name touring acts. Besides looking great on stage, it's a perfect way to organize and prewire your effects, tuners, etc. in conjunction with your amp head. Each Affordable Case is designed as a specific fit for each model of amp, so it's a good tight fit.

This Case keeps  the equipment isolated so that any shock to the outside of the case is absorbed first by the foam. This prevents the shock from transferring to your rack gear or amp head.

Each case is designed to specifically to fit your Gear.

  • Amp Foam: The Amp Head section is custom-fit with 1" foam on all 4 sides.
  • Vents: If your amp has a vent on the top, this is typically a secondary vent, and the foam above the amp is cut away to allow air circulation through this top vent. You don't even have to remove the amp feet; the bottom foam is cut away so you can simply slide the amp in and wire everything together.
  • Caster Board: The thick exterior caster board is extended under BOTH the front lid AND the rear lid to help keeps this case stable. The board also acts as a resting spot for each lid while it's being latched on.
  • Air Circulation: With both lids removed, you have complete air circulation from the front to the rear.
  • Doors: Removable front & rear matching door lids. 
  • Floating in Foam: All equipment stored in this case is suspend in foam. The doors provide a snug fit to secure your equipment safely. The important principle is that your rack equipment AND your amp head are FLOATING in foam.
  • Top Rack: The top rack is a completely separate compartment from the head section and is suspended on ALL sides with foam. It contains a separate 4-sided rack rails to alow front and rear mounted units.
  • Rack Bling: Each rack is trimmed with aluminum extrusion
  • Insulation of Equipment: The first time you put your amp in, the easiest way is to lay the case on its back, take off the front lid, and slide the amp DOWN INTO the case. 

We construct all of our cases when you order them

It takes up 3-4 weeks to fit your case in to our build schedule.

All of our cases are shipped from our location in Valley Park, Mo located just outside of St. Louis.

We ship our cases wrapped in cardboard boxes to help protect your beautiful new case. We leave the scratches for the new life it is starting with you.

[powr-faq id=c21389e6_1492195255]

[powr-contact-form id=935e9cf9_1480099695]

Double Head Road Case

  • Sale
  • Regular price $727.00


Affordable Cases spearheaded this unique case design many years ago for many of the top name touring acts. Besides looking great on stage, it's a perfect way to organize and prewire your effects, tuners, etc. in conjunction with your amp head. Each Affordable Case is designed as a specific fit for each model of amp, so it's a good tight fit.

This Case keeps  the equipment isolated so that any shock to the outside of the case is absorbed first by the foam. This prevents the shock from transferring to your rack gear or amp head.

Each case is designed to specifically to fit your Gear.

  • Amp Foam: The Amp Head section is custom-fit with 1" foam on all 4 sides.
  • Vents: If your amp has a vent on the top, this is typically a secondary vent, and the foam above the amp is cut away to allow air circulation through this top vent. You don't even have to remove the amp feet; the bottom foam is cut away so you can simply slide the amp in and wire everything together.
  • Caster Board: The thick exterior caster board is extended under BOTH the front lid AND the rear lid to help keeps this case stable. The board also acts as a resting spot for each lid while it's being latched on.
  • Air Circulation: With both lids removed, you have complete air circulation from the front to the rear.
  • Doors: Removable front & rear matching door lids. 
  • Floating in Foam: All equipment stored in this case is suspend in foam. The doors provide a snug fit to secure your equipment safely. The important principle is that your rack equipment AND your amp head are FLOATING in foam.
  • Top Rack: The top rack is a completely separate compartment from the head section and is suspended on ALL sides with foam. It contains a separate 4-sided rack rails to alow front and rear mounted units.
  • Rack Bling: Each rack is trimmed with aluminum extrusion
  • Insulation of Equipment: The first time you put your amp in, the easiest way is to lay the case on its back, take off the front lid, and slide the amp DOWN INTO the case. 

We construct all of our cases when you order them

It takes up 3-4 weeks to fit your case in to our build schedule.

All of our cases are shipped from our location in Valley Park, Mo located just outside of St. Louis.

We ship our cases wrapped in cardboard boxes to help protect your beautiful new case. We leave the scratches for the new life it is starting with you.

[powr-faq id=c21389e6_1492195255]

[powr-contact-form id=935e9cf9_1480099695]